Roofing Contractor in Goshen, Indiana

Goshen’s older housing carries steep-pitch gables, dormers, and the kind of complex rooflines that came with turn-of-the-century construction. Under many of them sit board decking and single-layer three-tab shingles that have weathered decades of Michiana freeze-thaw, leaving brittle, curling surfaces and tired flashing at every chimney and valley.

Flood-recovery and age-driven replacements here mean full tear-offs to sound decking, replacement of any water-compromised sheathing, and ice-and-water protection at the eaves and valleys. We correct the undersized attic ventilation common in old homes so ice dams and condensation stop shortening roof life on the shaded northern slopes.

We work throughout Goshen, from the historic streets near the Goshen College campus and the Old Bag Factory to the neighborhoods along the Millrace and Main Street. On a recent recovery job, a century home that had taken on water needed its decking rebuilt and a full re-roof; we tied new architectural shingles and fresh flashing into the original steep pitches without disturbing the home’s historic lines.

Landmarks like the Elkhart River, Shanklin Park, and downtown Goshen give us clear scheduling anchors for this extended-reach market.

Goshen’s historic core hides a structural catch under its steep Victorian slopes: many homes near the Millrace and College Avenue were sheathed with wide plank boards spaced for wood shingles, not the solid plywood or OSB modern shingles are engineered to grip. When we tear one of these roofs off, the honest recommendation is often to overlay the planks with new sheathing so the fasteners hold to spec — a shingle nailed into a shrunken board gap will back out within a few winters. It adds a step, but on a century home carrying dormers and multiple valleys, proper nail holding is what keeps the new roof on through the next freeze-thaw decade.

A Goshen century home near College Avenue and the Millrace lives or dies at its flashing. These steep Victorians carry dormers, multiple valleys, and more than one chimney, and each of those transitions is a hand-detailed junction where dried, rust-pitted metal quietly starts to weep long before the field shingles quit. On homes this complex, the worthwhile habit is a flashing check every few years — step and counter flashing at the chimneys, the valley metal, the sidewall joints — rather than waiting for a stain inside. When we do re-roof, we rework every one of those details in fresh metal and match a shingle that reads right against the historic trim.